nice howto @ networkstraining.com

Actually, very simple.

aptitude install seahorse seahorse-plugins
killall nautilus

Run seahorse and generate your PGP key and next time when you run nautilus, you’ll have a new option when pressed right click on file or folder – Encrypt…

in CLI write and execute two times command “edomtset“. when you press ?, you’ll get more commands.

more @ evilrouters.net

it actually works! all I had to do was to install vpn client called Shrew Soft VPN client and import Cisco vpn profile. if you have any problems, try enabling another network adapter in your Virtualbox host settings.

this feature is so cool!

Recently I installed Ubuntu Karmic (9.10) and everything worked fine until I made first upgrade. since then I had no sound. Solution is quite simple.

Btw. I assume that U have mediubuntu repositories installed.

sudo aptitude install alsa-firmware alsa-firmware-loaders linux-backports-modules-alsa-karmic-generic linux-backports-modules-‘uname-r’

Last step was to edit /etc/modprobe.d/alsa-base.conf and /etc/modules.

After restart, everything should be working fine.

withc gspca – everything explained here

check it out here -> http://www.linuxjournal.com/article/8366

check it out here -> http://www.linuxjournal.com/article/8366

@ http://blog.ioshints.info

user@computer# tail -f /var/log/messages

connect USB to SERIAL cable to your network device and to your computer. turn on network device, and locate port (mine is ttyUSB0)

—————-
[ 3201.770270] usb 7-1: new full speed USB device using uhci_hcd and address 2
[ 3201.934529] usb 7-1: configuration #1 chosen from 1 choice
[ 3202.360357] usbcore: registered new interface driver usbserial
[ 3202.360391] USB Serial support registered for generic
[ 3202.360484] usbcore: registered new interface driver usbserial_generic
[ 3202.360491] usbserial: USB Serial Driver core
[ 3202.373747] USB Serial support registered for pl2303
[ 3202.373815] pl2303 7-1:1.0: pl2303 converter detected
[ 3202.385706] usb 7-1: pl2303 converter now attached to ttyUSB0
—————-

user@computer# aptitude install minicom
user@computer# sudo minicom -s

go to Serial port setup, press A and change Serial Device (in my case it’s /dev/ttyUSB0).
now, press E and change Bps/Par/Bits to 9600 8N1.
Choose Save setup as df1, and then Exit.

voila! you’re connected 🙂

for extra configuration, you can edit /etc/minicom/minicom.users or simply use man minicom.